WEARSON WS-03A Adjustable LCD TV Stand Folding Metal Monitor Desk Stand With ...

This is a great little stand especially in my very small desk space. My screen has to fit exactly to a specific height, and the stand provides the flexibility to not have it so high. I looked into other stands and the thing I didn’t like was when I tried to shorten them, the screen had to be shoved forward which left no space for my keyboard. This stand is fairly short but I can also make it as short as I need without it being thrust that much forward. It was very easy to install and I loved that it had in addition to the correct screws plus one extra, the screwdriver needed so I didn’t have to hunt one down. The installation instructions were clear because of the pictures. I did get the screws mixed up, but then I specifically looked at the screw numbers listed on the instructions. The cover plate was easily snapped out and snapped back in again. I especially liked how it took a little bit of strength to move the arm, meaning that it won’t slip into another position. If you have trouble moving the arm, it can be loosened. The materials used to make this appear to be very sturdy. It is a very thick plastic or some other like material, and the part that attaches to the back of the monitor is steel. All in all, this is a great stand for my purposes!

These are solid supports for my 24" up-close Acer displays. They'd handle 27" displays, no problem. The config in my workspace is shallow-angle (~20 deg, relative to the desk). This enables wrap-around positioning of three or more monitors close to a seated position. It perfectly avoids obscuring an upright, large-screen display behind the center close-up, angled monitor. Competing products are sometimes reviewed as being flimsy. Um, no. The three WS-03A monitor mounts that I received in April 2026 are not flimsy. They're heavy and built like tanks. Be advised, mine arrived tightened to the max. So they were stiff as hell, but that's exactly what I prefer. Some users may want to slightly release the tension on the bolts - easily done with a wrench. A couple of overservations: The rubber feet on the bottom come with what feels like a bearing surface on them - a thin bit of clear plastic. If you want to slide your monitors around on your desk, consider leaving the plastic on. Otherwise, if you peel it off, the rubber feet provide a decent slip-resistant surface underneath. Note also that the base has mounting points on the bottom for a permanent connection to a table or wall, if it's what you need / want. I recommend this product without reservation.

— Updated review I bought a second one of these as they are perfect for my use case (holding Elektron music gear). The second one that I purchased was much stiffer and the Elektron gear attahced is held firmly in place at any angle - this is essential as they are hands on devices and movement during use is not wanted. So, I decided to look at the first one I purchased and I pulled the whole thing apart. I found the bolts that hold the loose hinge and tightened them. This was not an easy task as they are nestled in between plastic but luckily I had a small enough wrench to get in there. I tightened the bolts and it is now much stiffer. So, I will update my score but it's worth noting the inconsistency between the two stands. What I would also like to add is, these would benefit a lot from a small strip of silicone that would sit between the metal plate and the device you're attaching it to. The metal is sharp and could easily scratch whatever it is that you're attaching. It would be a small addition with a big impact. — Original review There might be a way to adjust this monitor desk stand so it doesn't slowly slide out of position, but out of the box this cannot hold a 3lb piece of gear without sliding downwards. I've looked at the back and there does not seem to be a way to tighten the hinges / bolts (they are hidden behind plastic panels that seem to be sealed). The product listing claims this can hold up to 20lbs. No way.

As you can see from the photo, I had a limited amount of height and this was the lowest profile stand I could find and it works great. I had to return the one with the adjustable stand since the whole stand was 2” higher than the ceiling of my bookcase I did have to adjust the height and tilt out of its space since it is so stiff, but it’s not moving anywhere now. The height is perfect. Super easy to install, took less than 5 minutes. Very sturdy. Good value for the money. .

This was exactly what I needed for my computer monitor. To give you some background, I had purchased some desk organizers to help keep my desk tidy. One of them being a monitor riser with storage and shelves. Due to the fact that my desk is an armoire style, vertical space is at a premium on top of my desk. The monitor on its own stand was too tall, and the stand was not adjustable.....at all. I needed something short - VERY short - to replace the stand. I found this unit that looked like it would go from 90 deg to 0 deg. Which it does. Beautifully. I installed it, folded it to where I needed it, and it now fits perfectly between the riser and the armoire. The edge of the monitor is sitting at exactly 1/4 inch from the top of the riser. The stand came with screws that fit the VESA mounts on the back of the monitor. It is extremely adjustable. It is very easy to install. The monitor is as sturdy on this stand as it was on its own stand, if not more sturdy. The joints of the stand are quite stiff. I found it difficult to adjust with my hands even without anything attached to it. BUT....I would rather have them too stiff than not stiff enough. Once mounted, it was easier to adjust than I expected. At first I thought I would bend or break something on the monitor trying to get it in position but it was fine. I would definitely buy this product again and highly recommend if you're needing a replacement stand for TV or monitor.

Einwandfrei. Stabil, wiegt ordentlich und ist sehr gut verarbeitet. Der Monitorschwenkarm ist ziemlich fest , man kann aber die beiden Schrauben and der VESA Befestigung etwas lockern dann geht es wunderbar mit dem Schwenken. Ich habe einen 16" Touchscreen, sehr leicht,kaum benutzbar mit Touch weil er sich sofort bewegte. Mit diesem Monitor Ständer bewegt sich nichts mehr, komplett bombenfest. Der Touchscreen kann endlich mit Streamdesk, Deskboard oder anderen TouchApps wunderbar benutzt werden, ohne dass er wegrutscht. Für Musiker > Studio One 7 - Mischpult auf den Touchscreen funktioniert alles. Plugins und alles andere auch per Touch Ohne Halterung undenkbar, das Teil würde ständig wegrutschen. Viel Spaß

Sturdy AF Well made and fits the purpose

Sabit olması en iyi özelliği

Un soporte VESA que se aprecia de buena calidad y práctico para el uso que tenía para una pantalla Dasung Paperlike HD. Lo único inconveniente, que los tornillos incluidos eran de mayor diámetro a los que requiere la pantalla.

Montaggio semplice, cura dei dettagli, molto solido. Ne ho presi 2 per lo studio di registrazione e ci ho montato i 27". Gli schermi restano ben posizionati, facile da regolare, la durezza del sistema permette delle regolazioni precise. Ottimo prodotto, sono molto soddisfatto.