VDIAGTOOL Key Programmer Key Fob Programming Tool Adding Transponder and Remote Control Keys OBD Smart Key Maker Work for Toyota G Chips Vehicles with 4d67/68/72(G) Chip via OBD2 Port

描述

Apply to 4D67,68,72(G), support both G and H chips, test on 2015 Camry. The way of engine anti-theft chip matching: 1. Close all doors and windows of the car. 2. Insert the original master key into the Ignition switch keyhole and turn it to the ON position. 3. Flip switch the key programmer to the left and insert it into OBD port at the bottom of the steering wheel. 4. After waiting for the "Dee" sound from the buzzer in the car, it will continue to "Dee". 5. After the continuous "Dee" sound, the anti-theft light is always on. At this time, turn off the original key and remove it. 6. Then insert the new key into the keyhole without turning. 7. At this time, the anti-theft light is blinking. Wait for about 2 minutes and see that the anti-theft light goes out, indicating that the engine is successfully paired. 8. Then pull out the key and remove the key programmer. Wait for 1 minute and insert the new key into the ON position to see if the anti-theft light is off. The off state can be started directly. The way of remote control matching: 1. Get in the car, close the door, insert the key, and turn the ON position. 2. Flip switch the key programmer to the right and insert it into OBD port at the bottom of the steering wheel. 3. When you hear a sound from the car, indicates that the function program of remote control starts. 4. Wait for the car to make a "DeeDee" sound and keep sounding, open the main driver's door. While waiting for the long beep, press the lock button and the unlock button on the remote control at the same time for 5 seconds to release, and then press the lock button again for 5 seconds to release, wait for the end of the long beep to indicate success (Note: if the long beep is not stopped, leave it alone). Remove the key and the key programmer, close the door and wait 5 minutes to test the new remote control.