Rocketarium Flying Model Rocket Kit Frangible Arcas RK-FRNGB

Description

Rocketarium Frangible ARCAS Rocket During the 1960's, the Frangible ARCAS was developed as a rocket that could be flown over residential areas. To avoid damage to property, or injury, upon landing, the rocket was destroyed in mid-air. It has a sheet of explosive material wrapped around the airframe. Once the explosive was triggered, the rocket was reduced to particle sizes with acceptable levels of kinetic impact energy. The scale Frangible ARCAS model separates at motor ejection and descends under a parachute. The kit doesn't get blown to pieces and can enjoy many flights, as opposed to the real deal. Dimensions Total length : just over 3 foot (36.5") Diameter : 1.637" (BT60) Fin Span : 4.647" Weight : 4.4oz Manufacturer Recommended Rocket Engines Estes D12-5 Single Use Aerotech E20-7 Reloadable Aerotech E18-7, E28-7, F24-7 Challenges: The explosive sheet wrapped around the airframe is created by cutting two short tube sections and gluing them onto the airframe. The transition from the airframe to the cut tubes if formed by the modeler with spot filler. Self-adhesive decals are included for all lettering shown. Model Rocket Kits are rated by Skill Level 1 Beginner 2 Intermediate 3 Advanced 4 Expert 5 Master If you are just starting in the hobby start at the beginner level and move up from there at your own pace. What is needed to build and fly All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit. Additional supplies will be necessary to build and finish your model rocket kit and may include: Scissors, Hobby Knife Ruler Wood Glue, Model Cement or CA(Super Glue) Sandpaper Masking Tape Finishing Supplies like: Wood Filler Sealer/Primer Paint Launching Equipment and Supplies