Clock Oil for Mechanical Clocks – Premium Synthetic Formula with Dual Precision Needle Applicator – Horace Whitlock – Won’t Gum or Run – 15ml Bottle

I thought I would have to take that 100year old clock apart and clean to get it working again. A few minor drops on the exposed pivot points and the clock started working again. Well worth it!!!!

I used this oil on the bearings of our wall regulator clock. It was running very slowly and frequently would stop. Once I applied this oil it ran perfectly again!.

Have a grandfather clock purchased new in Italy in 1982. It has a Hermle 451-053H movement. I bought a pen oiler with synthetic oil on here in 2015, used it at that time and several times since to rectify issues with timekeeping. Worked OK for that. Recently chiming became erratic, mostly striking on hour failing. Tried cleaning and re-oiling from side holes on the cabinet but still issues. Bought this kit and took off the hands and clock face to access the movement better. Discovered that a lot of lube points on the face were gummed up with green gunk which I cleaned with the sharp end of short bamboo skewers which had been dipped in aerokroil. Also used q-tips dipped in aerokroil (to point of dampness, not to point of aerokroil dripping out) to clean up the gunk. After thoroughly drying this up I carefully oiled all the lube points with this oil, put the weights and pendulum back on and started the clock up. The chimes started working perfectly again, 24 hours later. This particular movement is supposed to have 25-30 year life, but the now 42 year old movement is now working fine again, thanks to this oil. My impression is that the pen oiler with "synthetic oil" I bought back in 2015 could have contributed to the green gunk in my clock, this oil seems to be a lot better. I also like the bottle with the two nozzles better, as it is easier to hold while getting into tight spaces than the long pen oiler, and it is a lot easier to meter out a single drop from this bottle while you are lubing in tight spaces deep inside the clock movement.

Repairing a clock in an antique car, and after watching a video on repairing them, this oil was recommended since it doesn't turn sticky. The needle nozzles are very handy for getting deep into the mechanism to lubricate the bushings, and the clock is working great now.

So far, my cuckoo clock is working as expected after using this clock oil.

I have used on 2 different clocks , First the applicator works great it puts the right amount of oil in the exact place and the oil works great . I now have 2 working very nice clocks

The speed at which the oil disperses through the needle is perfect. I used this to fix my AE-1 Program’s Canon Cough. The needle was flexible enough to be bent at a 45° angle to help reach the gears it needed to hit. Zero noticeable odor, super useful! Will heavily refer my camera crew to this product for an easy fix they can do on their own when the inevitable cough occurs.

Top quality oil. I’m an old electromechanical engineer/ technician. Good oil.

Súper recomendable!

Excellent dispensing syringes for small spaces

Excellent item, comes with dispensers unfortunately it has not cured my stopped clock. I think it may need a professional clock maker to sort it out. Good item though, very pleased.