GP-Ultimate 15W- Thermal Pad 90x50x1.5mm. Excellent Heat Conduction, Ideal Gap Filler. Easy Installation.

My GIGABYTE GTX 1080 WindForce 3X OC (GV-N1080WF3OC-8GD) is almost 6 years old at this point, and even though my GPU core temps never rose above 73c I was getting full system reboots after some time. I ended up repasting the card with Gelid GC-Extreme thermal paste on the core, but this didn't completely fix the issue and didn't drop by temps from a whole lot of Corsair TM50 Paste from around two years ago. A quick investigation of the card while playing God Of War revealed that my VRMs on the GPU were getting VERY hot. I ended up taking the card apart, and found out that my GPU has 4 different thicknesses of pads, 0.5mm, 1.0mm, 1.5mm, and 3.0mm. I ended up getting a pack of each, and replaced all pads across the die side and backplate. Only difference from before and after besides the pads and paste was that I covered individual memory chips rather than a strip of three or two to save the material as these pads are a bit expensive. These absolutely made a night and day difference. My Idle temps dropped from 50c to 31c on the GPU core, and fully loaded it's hitting a max of 62c. My card isn't overclocked, by man. Pros: Idle temps dropped from 50c to 31c. Load temps dropped from 73c to 62c. If you use a sharp exacto-knife and a cutting board, the material, even in the 0.5mm size is easy to cut and handle as long as you are careful. The top layer of plastic may come off when cutting, but this didn't effect the thermal pad at all. Pros: The price. You pay a premium for these pads, especially if you need 4 packs like I did, but it was totally worth it. Especially since right now my 1080 is almost worth as much used as it was brand new thanks to current chip and GPU shortages. Because these have performed so well, I haven't deducted any stars because of the price.

I bought this to replace the 1.0 thermal pads needed for a raspberry pi 4 in an Argon One v.2 case. They are easy to cut, the backing peels off nicely and the quality feels great as the material is dense. I put some down on an m.2. ssd in the argon case as well and it adhered nicely to the uneven surface. Would gladly buy again!

They are packaged well and feel easy to work with. Cutting to size and then peeling off the plastic to apply is pretty easy with these. They're firm and stay intact with handling. Performance is more than adequite for most situations, I'd buy these for any midrange to high end GPU.

Bought these to repaste my second hand GPU since it was thermal throttling, Very easy to cut and apply, and works great. My GPU is a 3080, so I got the 2mm for the VRAMs and the 3mm for the backplate. Was able to repaste everything and still have plenty left over. GPU Temps: ~90C -> ~75C GPU Hotspot: ~105C (throttling) -> ~80C VRAM: 95C -> 90C

Excelente producto, recomendado 100%

Got this ones for a renewal of a GTX titan memory pads and work very well keeping temperature in the intended zone.

The Gelid Solutions GP-Ultimate 15W- Thermal Pad 90x50x2.0mm is a highly rated pad that's known to be more supple than most thermal pads. I had an EVGA 3060 GPU that I needed to replace the memory/VRM thermal pads on so I ordered this Gelid pad. A sharp pair of scissors is helpful to cut this down to size and not tear the material. The packaging details a performance test on the temperature when a 1mm pad is compressed to 0.6mm between the CPU and a CPU cooler (which is very atypical) but that is helpful for understanding how "squishy" the pad can be vs other thermal pads you might encounter. Price being relatively high and confusing, non-reclosable packaging is why I rate this at 4 stars. The package appears that you can tear out a perforated slot and slide the thermal pad out, but this 50mm wide pad is too wide for the opening and you actually need to tear through the sides a bit.

Este producto es un milagro! Se lo aplique a mi procesador Ryzen 5 5600x y luego de 2 años continúa disipando excelente! Recomendado! Mejor que la pasta térmica convencional, sea thermal griddle mx4 o noctua. La Mejor compra!

Sehr gute wärmeleitfähigkeit habe sie bei meiner RTX 3090 verbaut

I used this (and a few other thicknesses) to replace the stock thermal pads on an Asus 3090 ROG Strix. I was temperature capped (96 degrees) at 110mh and now I can get up to 125mh while maintaining decent temps (94 degrees). At 110mh my temp is at 82 degrees, great, but that's not what my goal was.

la version de 1.5mm es la mejor para poner en las 8 memorias Ram y las 6 V-Ram de la GPU en un PS4 PRO, disipan bien el calor y junto con pasta termica de alta calidad son la mejor opcion para solucionar el ruido de turbina de avion de los modelos 7000

perfecta para una 3090 ,baje temperaturas de memoria ram y la calidad de las mejores

Ben impacchettati, questi thermal pads con una conduttività termica di 15W/mK si presentano solidi e già freddi al tatto. ho preso la versione 1,5mm e la 2mm per la mia 6800XT FE anche se a posteriori avrei dovuto prendere la 1.00mm. nel complesso fanno il proprio dovere, le temperature sono scese come da programma nonostante la misura sbagliata (errore mio!). delicati ma non troppo, si piegano un po' a piacimento e si riescono ad appiattire circa del 20-25%, massimo 30% usando molta forza o un cacciavite come "mattarello". qualità comunque TOP rispetto ad altre marche. punto a favore per gelid: indicano sempre la conduttività termica, cosa che alcuni produttori non fanno. Spedizione sempre al top.