PK1-2 | Plastic Clean & Shine #1, Fine Scratch Remover #2, Heavy Scratch Remover #3 and Polish Mates Pack | 2 Ounce Bottles

Oh my god. I LOVE this! I bought it before a few years back just to polish the plastic on the interior of my car. It was good, but I didn't have major scratches. Fast forward to redecorating my apartment & buying clear "ghost" chairs (Ikea, Polycarbonate plastic, but still $80 a chair) and an acrylic tray I got from West Elm on deep discount because of a deep scratch (85% off) & figured I would deal with it, even though it bothered me every time I looked at it (so anal). Well, a couple of days ago I saw some thing stuck on one of the chairs, right on the top back, which I tried cleaning off with regular cleaner to no avail. Then I thought..I don't know what that is..maybe nail polish remover will get it off? OK OK - I didn't know that acetone absolutely destroys plastic so immediately and thoroughly! Pure acetone takes SO long to take fake nails off, I couldn't imagine a tiny dab for a second using a Q-tip could do so much damage. Nooooo!!! How could it possibly be worse?! It was so bad, dull scratched and about an inch all around, totally obvious above the table & no way to hide it. The cleaning ladies came and asked me what happened & I shamefully admitted to it. I was thinking I had to buy a new replacement chair just weeks after buying this set. Ouch. :-( And then I remembered this stuff & thought it was worth a try. The Novus kit came to my door & I immediately went to test it on the chair. I figured... it was my last hope. I skipped #1 all together and tried #2. Nope. Nothing. Then #3... and it was working! The edges that were slightly damaged were clear again. I went over it 5 times and you absolutely CANNOT tell how badly I messed up. It is perfectly clear & see through again. And my eagle eyes cannot even tell where the scratch was! Now only you & the cleaning ladies will ever know what a dumb thing I did. Yippee!!! Then I used #2 to take out some minor scratches on the seat of another chair (probably from someone's jeans that had buttons or metal) and it cleared up in one coat. It also polished up the tray with deep scratches like a charm too (only took 1 coat of the #3). Miracle stuff! I am SO happy I remembered this exists. If you have ghost chairs (especially those that paid hundreds of dollars per chair) or acrylic in your home, I recommend having this on hand. We KNOW acrylic furniture will scratch, but there is a way to polish it up!

I'm going to review this product from an application many have not used in these reviews, but I imagine many have come here hoping they had - restoration of toy plastic. I purchased this product with the intent to restore an old Kenner Batmobile (Batmissile) vehicle. It had a number of quite visible scratches and blemishes on the vehicle including one spot where I had tried to wet sand it leaving a ugly haze of scratches effectively ruining the sheen. So this product had allot cut out for it in terms of making this vehicle look good again. I hate saying this because I sound like a damn info commercial but this stuff is miraculous. Between the number 3 and number 2 applications I completely removed every scratch and blemish on this car. And I do mean EVERY SINGLE SCRATCH including that haze of scratches I left from using a abrasive pad on the surface. It looks better than brand new. But there's something missing in these ads for the product that you need to know if you want to make this stuff work at its utmost best - Elbow grease and multiple applications. These scratches took some effort getting there so it took some effort getting them out. I had to go over the hood portion three times with the #3 solution and then start buffing with #2 before I saw definitive results. If you think you're going to get there like your wiping a window, you're mistaken. And I imagine some of the people disappointed here were led to believe that's all that was needed. Not so. Think about it like you're buffing your car. You have to apply some pressure and do some serious rubbing until it dries then repeat. Use a cloth for each tube. Do not use the same one for multiple bottles. #3 takes down the deep scratches while #2 works on the surface ones. #1 is a cleaning agent to finalize the process and remove any residual application. I even took an old GI Joe windshield from an Adventure Team helicopter that was scratched and weathered and restored it to like new. This stuff works folks, but you HAVE to put some work into them. Now like anything, common sense has to be applied here. If you have a half inch cut in plastic, you're not going to "wipe" that away. But if its something on the surface that even leaves a bit of texture to the touch, this will take it off and leave a beautiful sheen afterwords. It's great stuff and I'm going to start using it on all my old Mego vehicles and essentially anything that fits the bill of being worn out plastic. So if you have old plastic collectible toys that have these problems? THIS is your stuff. It will restore them to like-new condition and I NEVER thought I could say that about any product. Give it a try and remember to put some elbow grease into it. You'll get the results you're looking for.

It works ok but I was surprised that #1 is just a cleaner. You still need to buy a UV protectant to keep it looking good for more than a few days.

for light scratches this is a great product I used it on the LCD screen of my aging DSLR and it removed all of the scratches from years of use. I have not tried it on heavier scratches so results may vary. the "wipes" are very large and I only used 1 cut into quarters (I could probably have cut those in half again and they would still have been big enough) I'm very pleased with the results

Werkt heel goed voor plastic onderdelen en koplampen etc.

Ero molto scettico sinceramente ma mi sono ricreduto al 100%. Ho usato i 3 prodotti con il panno uscito in confezione per rimuovere i graffi da un coperchio di un vecchio giradischi e dalla parte "lucida" di una PS4 che ormai presentava il peso degli anni, e incredibilmente sembrano oggetti quasi nuovi! Ovvio che non fa miracoli, ma il risultato è davvero ottimo e non gli davo una lira, ma per fortuna ho voluto provare. Ho cominciato applicando il prodotto blu numero 1 per pulire un po' la superficie, poi asciugato, poi applicato il verde numero 3 e strofinato bene e asciugato, e devo dire che a primo impatto non ero molto felice perché si vedevano ancora un bel po' di graffi, ma evidentemente è molto utile perché poi si applica il prodotto rosso numero 2 che ha praticamente eliminato ogni tipo di graffi, persino uno davvero grande e profondo che non è scomparso ma si vede molto molto meno, strofinato bene e asciugato; dopodiché finire applicando di nuovo il numero 1. Inoltre da aggiungere che sono anche profumati, pensavo puzzassero essendo prodotti chimici ma invece hanno davvero un piacevole odore. Ottimo!!!

Useful for polishing 3d printed resin objects

Lo compre para quitar los rayones de la tapa de un tocadiscos antiguo y fue tan bien que lo probé para intentar quitar algun desperfecto mas, y fue magico! Muy buena compra