PAUTIX USB 2M 5V COB LED Strip Warm White 2700K, Dimmable 5V 640LEDs LED Tape CRI85+ Flexible Tape Light for TV Monitor Backlight, Mirror, Cabinet, Wardrobe, Home DIY Lighting

I bought this to add some ambient lighting to the back of my office desk, as I prefer to work with the main light off and have more subdued lighting instead. Based on other reviews here (thanks) which mentioned that the light strip gives off a solid warm yellow light, rather than in spots like other strips I decided to try this. My desk is 2 metres in length, so the 2m version of this was exactly the right size. Installation was relatively simple, you peel off the backing to reveal the adhesive and simply stick it to the location required. I placed the USB near a powered USB strip I have, which provides enough amps/volts for it to work without flickering. The photos try and give a good representation of the strips effect, the first photo is on lowest power, the second is on highest. I typically leave it on the lowest power as it is directly against the wall, but I can see this working well against TVs etc. In 3 weeks I have had no issues with the light strip, the adhesive has remained stuck to the desk, and the lights have worked each time I have used them, which can be for hours a day usually. I'm thinking about buying this again just to add to other places in the home, eg under the bed.

I encountered flickering with a specific outlet plugging it in, but have since switched the outlet usb I was using and have not seen flickering since. Lights are bright and well adjustable.

Absolutely perfect! Easy to use, very sticky and the 2700 is a nice warm light.

These lights are fantastic when lit up as you can’t see the individual leds like you can in standard led light strips. The only downside is that the lights flicker violently sometimes due to power supply issues. It means that I have to fiddle with the cable to make it stop. Usually fine with 2A socket but can still have issues.

As stated by the seller, the LEDs will flicker if the strip is set to a brightness that requires more current than the USB port it's plugged into can deliver. On a USB 2.0 port that's maybe 60% of the maximum brightness. If you turn it up beyond that it'll start flickering and the inline controls stop working, meaning the only way to turn it back down is to first plug it into a higher output source like a powerbank. This is bad design. Additionally, the buttons on the inline remote are hard to press. For a set-and-forget use-case it's fine.

Wanted a LED strip for a nice underglow of my drawers and to light the inside of them. Looks incredible and lights up all the draws when opened up. Was able to cut it to length with no issues and the tape seems pretty strong, would advice putting a bracket or clip on the ends to prevent it from peeling off. Its very bright on max and can get quite dim too if you desire. Overall very happy with with this and highly recommend!

If you are using this for a PC setup like I am, just one thing is that if it is plugged into your pc it will not turn off when you shut down your pc you need to do it separately, it looks absolutely stunning and very calming lights, the remote control brightness and if you keep pressing the brightness up button it will flash faster and faster

Absolutely love these, got the 2m 2700k which is warm and cosy even at its brightest setting (pictured). The strip itself is very aesthetic and not like most which you'd generally choose to hide, like behind a monitor or TV. One thing to note is the lights will flicker if used with an unsuitable plug. We initially tried with an older Chromecast plug which caused them to flicker, but when used with a JBL plug they worked perfectly (both pictured).

I needed a continuous line of LED strips for a table with brightness controls. This has both LEDs instead of individual LED modules, giving a hidden and modern look. Really good quality. the packaging seemed a little cheap but thankfully it arrived sooner than expected (international shipping) and in working condition.