Question 1

has anyone every used it on their pet?  Wondering if it is too loud for a dog to sit through the process?

Accepted Answer

It is designed for cutting human hair but with care and caution it can be used on dogs with medium to long fur that is not very thick. Suggest you use a vacuum that you can adjust and control the suction. A vacuum with too much suction can pull in some loose skin areas on your pets and cause harm. I suggest you keep your hand on the vulnerable areas to keep the skin tight to prevent it from being sucked into the blade chamber if you are using the shortest attachment. Use extreme caution anywhere near the ears and paws, they can easily get sucked in and do real harm to them. I have used them on my 3 dogs for many years and it's a very effective way to groom your dogs if used properly and can save a lot of money. But, you must put in the time and work to do it. Depending on how long the fur is and how short you plan to cut it, will determine how much time it will take you to get the job done. If it's long and you plan to shorten it by an inch or more, then cut about 1/4 of an inch at a time. Much more effective and won't damage the flowbee. That means you may have to change the cutting attachment for a shorter cut several times to achieve the length you want. Use a cooling spray lubricant often designed for clippers every 15 to 20 minutes. Now, getting your dog acquainted to the flowbee and the sounds. Start by making sure your pet is secure and calm preferably on a grooming table. Take the head of the flowbee without the vacuum or flowbee head turned on and simulate the trimming process for several minutes to get them used to the bumping action on there body. Continue until the seem at ease with what is happening and they do not fear it. Next, turn on the vacuum and repeat that same process until you get the same fearless compliance. The next step is where you must have patience but it does work. Turn on the flowbee cutting head along with the vacuum, but do not touch your dog with it. Move it all around you pet slowly until your pet becomes complacent, calm and gets use the sound from both the cutting head and vacuum.  When your pet seems to no longer fear the sounds, slowly begin to tap along the the back from the lower neck back to the hind legs. If your pet reacts with uneasiness back off until they relax but do not turn off the flowbee or vacuum. Slowly begin the process of trimming and repeat if necessary. Your pet will become fearless of the trimming process after they know it will not harm them. I have three dogs and have followed these steps with all three and none of them fear the grooming process. The best part, no mess! Time consuming? yes! Worth it? yes! From my experience, take your time, be patient and very cautious around loose skin and especially the ears. If you nick them once you will never get them to ever cooperate again. I have two Pomeranian's and a Yorkie. The Yorkie loves it! The Poms could care less. Saved me a whole lot of money. Oh, I've used this flowbee on myself for 35 years! Saved a lot of money on hair cuts. Bought my first one when they only cost $59.

Question 2

I like to cut my hair crew-cut style, about a 1/2 inch. Will this cut hair crew-cut style?

Accepted Answer

Yes, absolutely. The box comes with several spacers for different desired length of hair you want. It will do a 1/2" haircut no problem. It also comes with a tapered spacer which I use above the ears and the back of the neck for a closer cut at those areas which also works great. I have used the cutter 3 times now and each time my haircut looks excellent. It's very consistent due to the spacers. It's great being able cut my own hair and not relying on anybody else. I love that independence. The money saved pays for the unit in 8 ($12) haircuts. Free haircuts after that! Trust me, you will like this unit. The Flowbee came out 30 years ago and I can still remember the original & somewhat corny commercials. Back then it was mostly dismissed as a TV gimmick type product. But I think the Internet/You-tube has breathed new life into the sales of this product. I wish I bought it 30 years ago. Hope that helps you pull the trigger to get one.

Question 3

can I use it myself

Accepted Answer

Yes.  I bought my first Flowbee in 1988.  Bought my second one about 20 years ago.  I've only paid for one haircut since 1988, while I was out of town for three months.  So my Flowbee has paid for itself many times over. One of the best purchases I've ever made.

Question 4

Is the vac worth purchasing for the flowbee? I currently use my floor vac with mine but there's not much room in the bathroom while I'm using it.

Accepted Answer

169.45 price with shipping for system with out vaccume which I've never seen the use for if you habe a floor or shop vac. Had the original flowbee and it locked up and wouldn't work after about 15 yrs and 13 ýrs stored away. Love the flowbee!

ASIN	B000PPBSTC
ASIN	B000PPBSTC
Best Sellers Rank	#71,054 in Beauty & Personal Care ( See Top 100 in Beauty & Personal Care ) #417 in Hair Clippers & Accessories
Blade Material	Stainless Steel
Brand Name	FLOWBEE
Customer Reviews	4.4 4.4 out of 5 stars (2,709)
Included Components	Hair Clipper, Power Adapter
Is Discontinued By Manufacturer	No
Item Weight	1.35 Kilograms
Item model number	Haircutting machine
Manufacturer	FLOWBEE
Manufacturer	FLOWBEE
Manufacturer Part Number	Flowbee Haircutting
Model Number	Haircutting machine
Power Source	Electricity
Product Dimensions	15.2 x 8.9 x 4.7 inches; 2.98 Pounds
Set Name	Flowbee Haircutting System
UPC	735162637008
UPC	735162637008
Unit Count	1 Count

Flowbee Haircutting System | Self Haircut Trimmer to Cut Your own Hair at Home | Flowbee Hair Cutting Machine | Mini Vac Sold Separately

Details

Details

Description

Specifications

Common Questions