KXKZREN Boat Flooring EVA Foam Decking Sheet Faux Teak Marine Mat Non-Slip Boat Carpet Self-Adhesive Flooring for Jon Boats Motorboat RV Yacht Kayak Swim Platform

We purchased this to replace the worn out carpeting in our boat. This has such a nice feel while walking on it and it does not get hot. We live in Arizona and things get hot quickly in the sun. It’s so nice not to burn your feet. Take your time putting this together and it turns out very nice. I can’t speak to the durability yet as we just installed it. We have one trip to the lake so far with eight people on our boat, it seems to have held up for that one trip. I will update as time goes on. I can speak to the stickiness of the adhesive, I cleaned my sub decking to make sure it was dust, free and ready for install. I find there are several areas that are starting to peel, I’m going to remedy this by putting carpet glue down. 8-8-23 update We still enjoy this flooring. Things to note: The floor has shrunk slightly and has revealed some of the sub flooring, not a big deal but one to note. The adhesive backing is not very strong, I recommend putting down outdoor carpet glue, it helps to hold this down well. The floor stains very easily, make sure to clean with soapy water right after use or you will have different colored spots from water, dirt and spilled drinks etc. Still is cool to the touch and easy to Walk on, even while being out in the sun on 118 degree days.

Surface was cleaned and finished with acetone. Easy to apply and adhesive stuck solid for a full season and through winter so far. Stuck to fiberglass and wood. This can get hot in the sun, and it does expand and contract. But real teak splinters, discolours, and looks like garbage much quicker, so take your pick. In fact we put this over some grayed out teak steps. We love this. It looks great, and super easy to install and clean.

We bought this to do a balcony. The description made it appear good for swimming pool areas, so I assumed that implied water resistant, all weather, etc. I don’t have an opinion yet on how it winters (it snows here…) But I will tell you right now, do not waste your money. First is the lack of consistency! The stripes do not line up, the machine that cut the rolls didn’t cut them identically from one roll to the next. I ordered 10 rolls, and only 3 had the same spacing from the end of one to the start of the next piece. So that causes the whole project to be a little wrong. The next thing is the lengths are also not identical. I’m very aware that this sort of material will stretch, especially on a hot install day, so we were very careful to store the pieces not in use yet in the shade, too lessen the heat and stretchy characteristics. I’m not new to installing flooring, this stuff was not very well cut at the factory. It looks nice once down, but if you are expecting it to look seamless in the symmetry, you’re going to not be happy. The last thing was the wax paper backing Was terrible!!! No matter how carefully the 2 of us worked together (and this is a 2 person job if installing more than probably 4 sq ft pieces) the stupid paper would tear like cheap old masking tape off the roll. Yeah, you know what I’m talking about. Very annoying!!! This material wasn’t cheap, so I’m not leaving terribly glowing responses to it. If you were doing small areas ( nothing more than a sheet at a time) it would probably be great. But trying to do large areas has turned into more work than it should have, for results that I’m not happy with. UPDATE AFTER A FEW WEEKS I did not submit my reply until I could watch the stuff for another month. I absolutely wish I had never spent over $1000 on a bunch of it now. I’m gonna have to literally peel it up and take it to the dump. It is coming off of the surface which was clean and smooth, it’s buckling, it shrinks in the sunlight, the stuff is the worst. If you are going to use just one piece of it and it doesn’t matter if it does those things then it would be wonderful. But if you need this to actually look good and be affective, do not waste your money

This product turned out better than we had expected and we expected it to be great...it acfally turned out to be fantastic! We put this flooring in the main salon of our boat after removing the carpet. We did use indoor/outdoor carpet adhesive just in case the adhesive already on the flooring was not quite enough. It was easy to cut and apply. It is very, very important to make templates before cutting the flooring and to not be in a rush to finish the project. Do not skip this step. We have yet to add the separate trim (different company and product material) we purchased to trim the floor hatches and adjoining areas. We expect the flooring to last longer than suggested due to putting indoor outdoor area rugs on top of our new flooring. We will probably continue with this flooring throughout the rest of our boat. Love it!

husband loved for his boat