Tough Armor Case Compatible with Google Pixel 7 Pro - Black

I’ve been using the Spigen Tough Armor case on my Pixel 7 Pro, and it’s honestly one of the best balance-of-protection-and-price cases out there.Build & Protection:This thing feels solid right away. It has a dual-layer design (soft TPU inside + hard shell outside), and it definitely gives you confidence if you’re a little rough on your phone. The raised edges around the screen and camera are a big plus—no stress setting it down on rough surfaces.Fit & Feel:The fit is spot-on—snug without being a pain to put on or take off. Buttons are tactile and clicky, which isn’t always the case with thicker protective covers. It adds some bulk, but not in a way that feels ridiculous.Kickstand Feature:The built-in kickstand is super convenient. It’s sturdy enough for watching videos or video calls, and it doesn’t feel flimsy like some cheaper cases. Definitely a standout feature at this price point.Grip & Design:It’s got a clean, no-nonsense look. The matte finish helps with grip, though it’s not super rubbery—so it’s not completely slip-proof, but way better than a bare phone.Downsides:Adds a bit of thickness compared to slim casesNot the grippiest option if your hands are really dryNo built-in screen protector (not a dealbreaker, just worth noting)Overall:For under $20, this case punches way above its weight. If you want solid everyday protection without spending OtterBox money, this is an easy recommendation.

Okay. So this is probably going to be a little lengthy. So let me start off with, I'm EXTREMELY picky when it comes to phone cases. I'm one of those weird phone case addicts. So i want my phone cases to fit 100% perfect, spot on. I don't want any flimsyness on the edges or corners. Now, I traded in my iphone 12 pro for the pixel 7 pro. And coming from an iphone to the pixel line, the LACK of phone cases from companies is horrendous. And the QUALITY isnt there either. As where if it was an iphone the quantity and quality would be 100%. I decided to try out and OtterBox clear case for my 7 pro, and the fit was horrible. The speakers on the bottom were misaligned, there was little to no coverage on the sides of the phone, and the edges of the top & bottom of the phone was exposed. There was a slight lip, but you could clearly see the gold trim was exposed. Which obviously really bothered me. The phone popped out of the case super easy. It's pretty sad that these big name companies can't just deliver the same way they do for the iphones. BUT, Ive been getting spigen for years and I've decided to just completely stick with their cases. Spigen delivers on all their cases, whether its for iphone or Android. The QUANTITY & QUALITY is there 100%. I have the tough armor & liquid air for my 7 pro, and the fit is perfect on both cases. I have the liquid air for times I just want a thinner case. The tough armor is nice & sturdy. Fits perfect. No looseness. They make perfect cases every damn time. These other big name companies just suck when it comes to the pixel line up. So thank you SPIGEN for always coming through. I will forever be a customer.

Solid case. I've bought two of these.As protective as anything else. You can disassemble the whole thing to clean it out when it gets gross, making it as good as new.The kick stand works great too and isn't delicate. You could abuse it and snap it off if you really wanted to, but it's perfectly fine for normal use - you've have to REALLY want to tear this thing off.

I upgraded to this case from Spigen Liquid Air. It has more support and protection. Inside the case is an additional padding layer, and I use the kickstand to watch videos. Overall, this is a hard and sturdy case.PS: When attaching the magnet disk for the magnetic phone holder, separate the inside lining of the case and attach the disk directly to the back plastic cover. A couple of divots are right under the camera opening, so attach the disk under them for a flat fit. The first time I installed the metal disk on the padding, it did not connect well with the magnet.PROS:- Good sturdy case- Great fit and protection all aroundCONS:- The volume buttons are flat, and there is nothing for your finger to remember which one is which- The case is smooth and does not have a good grip like the Liquid Air- It feels more plasticky, probably because there is more plastic covering the phone

Left my phone on the bed of my flat bed truck...it flew off on a turn and sat there on the road for 1-2hrs before I found it laying facedown on the pavement. The screen was ANNIHILATED but the phone seemed to still be working based on the haptics. So I ordered and installed a new screen and wouldn't you know it...it works like new again. This phone was run over AT LEAST once, and this case played a big role in saving it. Not to mention all the "normal" drops it's taken...it's a great case, perfect fit, sturdy but not overly bulky, subtle, and a lil kick stand. Liked it enough to buy the pixel 7 version for my brother.

Compared to my first case for the Pixel 7 Pro, this feels solid and more protective. The case doesn't soften up and isn't that easy to remove with one hand so it holds on to the phone firmly. It bevels out on the edges so you lay the phone display down on smooth surfaces with just enough clearance. My biggest peeve with my previous case was the fact the camera lip still protruded that I always grabbed it by the camera when I reached it from my wireless charger. Not so much the case with the Spigen and the case eliminates the lip. Could be a good or bad thing if liked to rest your finger beneath it while holding the phone. The kickstand doesn't feel flimsy and supports the phone in landscape mode. Don't bother trying to stand it up portrait mode for video chat as the phone is way too heavy for it. The edges of the case are a bit sharper side against the palm after a while. It tends to irritate my palm after extended use. I guess you can consider that as a "wellness" factor to prevent you from holding your phone for too long...ha! The volume buttons are also hit or miss. Sometimes I hit the power button instead of the volume up button even though the power button has an indent, whereas the volume buttons are flush with the edge of the case. The volume down button seems a little offset that I have to hit the highest point of to make a solid contact. A small annoyance but not terrible to manage.With the small cons, I bought the case for protection and this will do the job. I wouldn’t say it’s the perfect case with minor imperfections but I don’t regret it at all. Spigen has always been my go to and so far I’m content.

The Pixel 7 is annoyingly thin and slick. It's hard to hold on to and will slide off almost any surface that's not completely level. You can't prop it against anything, it just slides over onto it's back.This case adds just enough bulk and weight to make the phone feel sturdy and it's pleasantly grippy. Plus the squared edges mean you can sit it against something and it will stay in place.The rubber inner layer is durable and not too soft. The plastic outer layer is thin but rigid, so the phone feels nicely protected.On the negative side, the kickstand feels like an afterthought and is pretty flimsy. I d find myself using it a lot, especially when sitting down to eat, so I expect the kick stand to break within just a couple of months.The buttons are a little stiff and while the power button is nicely textured the volume buttons are a little harder to differentiate by feel alone.It still gets 5 stars because it's a good value and a solid case. And I haven't dropped my phone once since using this case, though I'm sure if I did, the Spigen would protect it.

I bought a cheaper case after pre-ordering my Pixel 7 Pro because I thought it would do the job I was looking for (and get it protected from the start), and that was to protect all sides of the Pixel 7 Pro, not just the top and bottom of the screen.As owners of the Pro know, the screen is curved at the left and right edges, and most cases dip below this to allow the user to use all of the screen. However, this is a design flaw much like the Samsung Note, where every drop is at risk of cracking the screen on the edge, since protection is nil there, typically.Now, I've owned Spigen cases in the past for other phones and have had zero issues with dropping phones. Therefore, once I realized Spigen made one for the 7 Pro, I immediately bought it. I saw it had substantial protection of the curved screen edges, which is exactly what I was looking for. Since the curved screen edges act as a pressure point when dropped, as long as the edges are protected, I'm good with it - I don't need the entire screen plane to be protected, necessarily.Of course, more protection means more bulkiness and perhaps inoperability of the full screen. I can say I have no problems using the entire screen still. Those complaining about gestures or moving icons from one page to the next are thinking they must go to the very physical edge of the screen, but you don't. Works just fine for me. Now the case is bigger than the original cheap one I picked up, but it's not overly bulky. It's made the phone a bit heavier as the case itself is a bit weighty for a case. But again, if you want protection, you're going to sacrifice in some other department. I'm ok with a slightly heavier phone if it means not dropping and breaking a thousand-dollar piece of equipment.The kickstand is a nice touch, especially for a phone as big as this, as watching things vertically and horizontally is going to happen. I had another Spigen case that had a kickstand many years ago, I used it more often than you might think. Expecting the same with the 7 Pro.And if you read reviews where the case is "broken" when it arrives. It's not. The case is two pieces (softer/pliable rubber case and a hard shell that clicks in over it). You're supposed to take the hard shell off of the rubber portion and put each layer on separately. The buttons line up perfectly fine; user error if they don't (try taking the case apart and then assembling, due). There's also no smell, I can barely smell the plastic with my nose on the case and smell is my best sense.Oh, and it's not designed or made in China. Spigen is California designed, South Korean-made.

Ich benutzte diese Hülle bereit seit Jahren für mein nun ausramgiertes Huawei P30. Hier hat mir die Hülle das ein oder andere mal eine Menge Ärger erspart.Mit dieser Hülle bekommt man wirklich eine top Qualität in Sachen Verarbeitung und Haltbarkeit.Ja, sie trägt ordentlich auf, hält dafür aber auch was sie verspricht.Vorteile:Perfekte PassgenauigkeitMacht das Handy sehr griffigDie Tasten an der Seite sind schön groß und voneinander gut zu unterscheidenKamera ist auch geschütztDer Aufsteller auf der Rückseite dient gleichzeitig auch als HaltehilfeInnenliegende SchockabsorberNachteile:Habe noch keine gefundenBzgl. der in anderen Rezensionen bemängelten losen Rückplatte: das solm so sein. Das dient dazu, das Smartphone 2infacher in die Hülle zu bekommen, da diese sonst sehr steif ist.Ich benutze die Hülle zusammen mit einem 9H Glas und auch die Ränder werden hier sehr gut geschützt.Klare Kaufempfehlung

Eu esperava uma capa mais encorpada. Eu conheço a Spigen desde o início e ela era competidora direta da Otterbox (que é fenomenal e melhor, mas também mais cara). Eles deixaram o design mais slim e acredito que o grande diferencial dessa capa são os painéis com design preciso para absorver o impacto de maneira que não prejudica o celular e pode cair a vontade. #slamboycertified

とにかく丈夫です。何回か落としましたが、本体は無事です。

肌触りと見た目の高級感があっていいです。　大事なスマホ本体も3層構造でしっかり守ってくれそうです　買ってよかったです。

Je viens juste de recevoir cette coque et je suis très agréablement surpris par sa qualité.Jusqu'ici, j'utilisais des housses en cuir pour chacun de mes smartphone (fitbag).J'étais un fervent défenseur de l'utilisation nue du smartphone et de la housse pour éviter les rayures en déplacement.J'ai décidé d'opter pour une coque ouverte comme la majorité et je ne suis pas déçu par mon choix.Certes, cette coque rend le téléphone plus volumineux (surtout perceptible en largeur) et plus lourd.Pour autant, la préhension est excellente et le téléphone est très bien protégé pour un usage courant.Je recommande donc à 200% ce produit.Le rapport qualité / prix est imbattable.