Korky 6051BP Strongarm Tank Lever Universal to Fit Front Angled Side Left and Right Mount Toilets, 1 Piece, Chrome, Faucet Style

Solid handle, looks great. Uses the red clips to hold the internal lift arm to the main handle post, so it's pretty easy to install. You can unhook the chain lift arm, wire it to the plunger, then attach to the main shift handle and clip it in. Took me about 10 minutes to install and only required a pair of adjustable pliars to remove the plastic locknut inside the tank on the old handle, and install the locknut on the new handle. my old handle had a NON STAINLESS shaft through the middle of the flush handle, and it rusted out in 2 years. Hopefully this one is non-rustable and will hold up longer.

Great design for an adjustable tank lever. Easy to position, and the clips feel durable. I also like the weight of the press due to the included spring. I was worried the angled position of the lever on our tank would be problematic, but this lever works perfectly.

Gerber is a good toilet, but their parts really suck. Gerber flappers are way too thin, and they can easily deform over time (less than 3 years like mine in a new home). Gerber flapper started leaking, so I went to my trusty Home Depot got my Korky toilet stuff. During my years, and years in an apartment, I had trouble with a leaking flapper over and over again. I purchased a Korky flapper, and it lasted for years and years, until I bought a home. So, I know Korky works! o Korky Flapper feels a little heavier than the Gerber when I flush. I had a feeling that my flimsy Gerber flush lever will eventually break. I was worried about that, and found this Corky!! Very Sturdy design! Now, it's pulling their own heavy-duty flapper with their own flush handle. Fancy looking handle to choose from. Very easy to install and the rod is angle adjustable, so it'll fit most toilet tanks. Thanks Korky! By the way, those poops in the photo was purchased from Amazon. haha

Very happy with this replacement used with my American Standard toilet. The design is more upscale than what I had before, and it was easy to install. No tools were needed and I liked the angling options and clever use of a clip.

It's a goofy thing to review a toilet flush handle but here we are. This Korky oil rubbed bronze handle looks nice and has a decent weight to it. Install is easy and had almost endless adjustability. The issue however lies in the design. It is sloppy when installed, the tolerances are just too loose, the handle is sloppy and wiggles back and forth. I never knew this was a real first world issue until I replaced a OEM handle with a Moen ($25). That handle had very tight tolerances and was just so smooth to operate. The primary difference is simple, the Moen handle uses a thumb screw to secure and tighten the arm aperture instead of a retainer clip. If Korky adopted this design feature so you could tighten things up and the handle wouldn't be so sloppy when installed it'd be a 5 star product. Unfortunately that particular Moen handle also protrudes out about half a inch too far and the toilet seat on my slimmer tank hits it and does not open all the way. This Korky handle is lower profile and fits nicely solving that particular problem. A workaround for the sloppiness of this handle is to either use a O ring between the gear where the arm attaches and the main body screw retainer, or as I did, wrap some teflon/silicon tape in the gap to sort of make a makeshift O ring. Then to further tighten things, use teflon/silicon tape in around the primary retainer screw. This helps a lot but isn't perfect. Ideally Korky would redesign it to use a thumb screw instead of a retainer clip and use a O ring. Anyway.. it's a toilet handle, it's easy to install, it flushes, and it looks nice. But, it's got a bit of wiggle when you jiggle.

easy to install and looks like they're well made and will last a long time

Perfect replacement. Note that this lever gives more height correction and flexibility for the chain. It was literallly the best solution after 3 failed attempts with other manufacturers

Easy to install. Fits a variety of tanks. Looks great.

I installed a well know brand of 'flapper' type flush system a while ago and the supplied spring-loaded handle was left-mount only! I've had some very simple flushing arms for a while but the last one broke and similar replacements were getting more expensive. I like the look of this and as it wasn't very expensive I thought I'd risk it. It turned out to be perfect. Very well made and easy to fit and adjust. It looks like it should last a long time, however I'm ordering another for peace of mind!

Muy buen producto, de gran calidad y muy fácil de instalar.

Changed the flush system on my toilet. The new system needed a spring loaded handle and this did the job. Not cheep but functional and should last. Happy enough with my first installation that I will repeat on a second. Hence purchase number two

Very easy, tooless installation. Like the clip design. It's sping action, which makes it 2x easier to flush. It's not fully flushed witb the toilet, but that's an easy fix. So far it's as advertised and seems of good quality

I bought this for the look. But it turns out its a great handle!! It can be adjust vertically AND horizontal inside the tank so the lift is right over the flapper. Witch makes it much easier to get it set right. The handle is also spring load so once you flush and let go. It springs back. No big deal. But a nice feature. Overall I am very pleased.