ThingyClub® Adjustable Aluminium Universal Single Laptop Notebook or Tablet Desk Mount Arm Stand Bracket with Tilt and Swivel

Took a bit of a risk on this as wasn't sure it would suit my awkward and messy workspace or do what I needed it to as so many obstacles to over come. Chair arms, desk area etc. But it really is so adaptable I don't think there are many spaces it won't work in. It was easy to put together and after a bit of tweaking got it where I needed it to make things a bit easier and add more work space. Holds my chromebook really well, it is really sturdy and no worries about it falling off, pretty sure it will easily hold he weight of my laptop as well. It's not cheap but it is so adaptable and sturdy I do think it was money well spent to add space and less strain using a laptop/chromebook. Just make sure you give your cable enough flex if you move it around as I did notice it catching a bit as I need to swivel it around a fair bit especially while getting it in the right place.

Okay so I needed this for the front of my desk. So I needed to make a small adjustment to make it not stick up intrusively! As you can see from the last picture. I sawed the bit I don't need off, and it took me about 5 mins of light sawing, it's quite sturdy actually and I was surprised it's actually supported inside and not completely hollow! I need this for my art pad, and I wasn't willing to pay for the expensive art pad branded arm! So far this lets me turn my pad most ways, though I've realised it doesn't 360 tilt which is a little bit 'eh' but it's not something I actually have to do a lot! It tilts most directions but just not a full rotation, if that makes sense. It's my first foray into this sort of thing so I have a feeling I may end up replacing it for a full tilt device BUT I'm -very- happy with this so far! I did have trouble with it first time around and had to send it back. So be mindful with the bolt that secures the plate for the screen/laptop in place as it seems it -can- get stuck if you're not extremely careful with it? I think the metal very easily mashes the plastic inserts and you'll end up with a forever spinning bolt that can't be removed without a drill of some sort! The second time around I was featherlight careful to try to not tighten it in any way tightly and it's great the plate holding the screen is very secure too.

Was easy to install and works as expected. Seems very sturdy so far in handling a 27 inch monitor. There is some wobble when typing hard but it’s no bother. Design is sleek and it has a nice white trimming with the silver overall design. And the space available on the desk and under the monitor and laptop is fantastic! Would recommend highly

My use: I have a narrow (in terms of width - front/back distance) desk and needed a bracket to hold laptop (14") and monitor (27") to maximise available desk space. Also in matte black to suit my desk setup colours. The Good: Nice matte black metal parts (main shaft and arms) with some plastic slightly glossy parts on the arms - also available in silver (although the plastic parts are an off white colour which I don't looks that good against the matte silver metal). Construction seems fairly sturdy once built and quality is reasonable. It didn't seem cheap to me (£63.86 in early Jan 2021) but there weren't many competing products at the time of purchase. Fairly easy to install following the provided instructions and allen keys, nuts and bolts etc. The Bad: The joints may require some frequent tweaking (can get too stiff or too loose quite easily) with the provided allen keys and there are limited options in terms of height and angle of the laptop and monitor arms. Also, the laptop arm can be modified (need to purchase/add a vesa mount) to a vesa monitor arm but the heights won't be at the same level, so would be an imbalanced dual monitor set-up (to be fair it wasn't advertised to be dual monitor). It was advertised as scratch resistant but I did manage to scratch a couple areas of the metal parts. Overall: Good product that does the job as advertised and with no real competing products in terms of looks, price and function at time of purchase (early Jan 2020 - sold by ThingyClub, fulfilled by Amazon) but there are some limitations.

The arms are super easy to set up and have a sturdiness which puts you at ease with its ability to hold up your monitor and laptop. I’ve been using it for a while and it’s made my home office set up much nicer. The arms are adjustable, it will take a bit of time to fine the right height and set up but once it’s done it’s really nice. The cable management is good, it’s helps hide the cables nicely.

Absolutely love this thing, it’s a bit pricey but damn it makes a huge difference. It articulates in so many different directions, has integrated cable management and is overall extremely well built. It can accommodate a decently thick desk and has been one of the best purchases I’ve made for my desk. Highly recommend. One of best things about it is being able to reclaim the desk space a traditional laptop stand would usually occupy. Being able to adjust the angle and direction the laptop is facing for video calls or just general viewing angles is great. I use it with a 16 inch MacBook Pro and the weight is not an issue at all.

Easy to setup, my desk has rectangular metal sections only 20mm wide running under the desktop running right where the until should clamp on, but a couple of wood spacers of the same depth (40mm) behind the section gave enough surface area to allow the clamps to do their job. The bars combined with the extra desktop thickness (26mm) also make it quite thick & required use of the extra screw holes in the backplate to move the clamps down and extra 10mm (not sure why they don't just have it like that as standard slightly longer threads, but sure there's a good reason). Otherwise installing it was smooth sailing & love the clip in VESA mounts making it super easy to bolt to the screen and then just slot it down onto in the arm bracket; a pleasant change from having to balance the monitor on one hand while faffing with trying get the first screw started. Unit is clean and elegant; desk setup has the rear of the desk facing out into the room & a lot of the other stands I looked at all made the base look pretty but started to look knobbly at the elbows and/or arm ends - the ThingyClub stand is almost a work of art by comparison. Stand is sturdy also, I get slight wobble on the tip of the laptop monitor when I'm fidgeting, but I have the tray almost vertical like a book stand with the laptop screen stretched back as far as it will go so not surprising. The actual monitor, 30" super-wide & sitting right at the top of the pole, is super stable. The one feature I miss is the ability to rotate vertically, e.g. to put the monitor on it's side - can obviously be achieved by repositioning the VESA mount, but e.g. on the laptop arm it feels like the screen is not quite straight - it probably is, but would be nice to be able to adjust it nonetheless - but it's not a feature it's meant to have so can't really complain!

Overall the quality is very good and quickly to assemble. Where this item is particular flawed is the laptop tray, as there is insufficient air flow in the tray to cool the laptop which subsequent melts the glue fixing the rubber bumpers in places to protect the laptop. Secondly, you're not able to level the laptop screen as you are with the monitor arm, as the 'X-axis' does not allow you to rotate to align the laptop with the adjacent monitor. My MacBook M2 is well within the 5kg recommended weight limit but unfortunately the arm still sags, causing the screen to be 6-8mm out square. This might not bother most but for the price I thought this was pretty flawed in the design. Contacted the manufacture who were very responsive but weren't able to resolve, unless I had the laptop arm double up on itself to reduce the sagging (which it did slightly).

Lo pedi una segunda vez ya que la primera no llego y despues de 4 años sigue igual, no ha cedido ningun acople y se sostiene de lujo, es sin duda de una muy buena calidad, cumple su funcion a la perfeccion y no dudaria en volver a comprarlo, me sorprendio mucho su fiabilidad y facilidad de montaje asi como la durabilidad.

Sehr hochwertig und funktionell. Tolles Teil.

Produit vendu avec 2 bras mobiles. Ce qui est dommage, c'est que l'on ne peut pas acheter séparémment un autre bras.

For these prices, this is too wobbly! The plastic ring is the main reason for wobbliness. The rest of the materials are relatively good quality.

après plusieurs mois d'utilisation, je peut dire que le produit remplis bien sa fonction. aucun souci.