EUREKA ERGONOMIC Computer Tower Stand, Height Adjustable PC Stand for Under Desk, Mobile Rolling CPU Holer with 360° Locking Caster Wheels, Desktop Tower Cart on Floor, Desk Accessories, Steel, Black

I needed to make room on my desk for studio lighting and a microphone arm, but I didn't want to put my expensive PC on the floor because it's carpeted, so I decided to get a cart for it. There's a similar metal cart on this site for $54, but I couldn't justify that kind of money for what it is. However, I still wanted something sturdy and mobile, so I took my chances with this cart. It's perfect! Easy to put together and incredibly sturdy. I'm not worried about my PC crashing to the floor, and the fact that I can elevate it means not only is it well away from the carpet, I also don't have to invest in a bunch of longer cables for everything. The guard rails on either side make sure that your PC isn't gonna tip over should you or a pet accidentally bump into it, and you can move the whole thing around for easy vacuuming. Also, the shelf is long enough that if your PC already fits on this cart, you shouldn't have to worry about the tower tipping forward or backward, which is a problem I've seen mentioned in the reviews for cheaper carts and stands. If you're between the other metal cart and this one and don't need the second shelf, go with this one and save yourself the $18. Also wanted to mention that the logo is only on one side, and this cart is otherwise symmetrical, so it's easy enough to have it face away from you if that's something you're worried about.

Got this last week. Reasonable quality. The powder coating is even. The u-shaped frame-pipes seem to have nuts welded inside the holes, as opposed to just punching the metal and Trying to thread whatever gets pushed in. (Been there before, dislike that.) Assembles with 8 screws. Plus 4 casters. Seems solid, with the screws tightened. (Philips #2 not included.) I did not need the directions, except to see which of the two choices of holes the longer bolts went in. (Which becomes obvious, anyway...) Third hole from the top - was there 5 or 6? I forget...) brings it to just under my desk (Standard 30" tall?), with 2-3 inches left above, just enough to reach the USB ports up there. It leaves a little space below. I plan to put a board across the bottom bars to hold up a BG500 (my small no-longer-manufactured UPS from APC) under the computer. Did not measure the height below, as I did not buy the board yet. It's 3-4 inches or so? The BG500 will definitely fit laying down, and will then roll in/out with the 'puter. (A BACK-UPS 300 may not, as it's taller and the inserted plugs would then also point upward. Put this one on the floor below it, if you have one, no shelf.) Seems sturdy enough. Gets it above the floor dust. Fits my 'Game' tower. (I bought "Power".) Rolls easy enough to get access. (Wiring tip: Leave 'service loops' - aka enough extra slack - in your cables, so there is enough wire to pull the 'puter out for access , if you often need to, without needing to unplug things.) If I was going to nit-pick, I might say the shelf could be an inch or two longer, but the feet of my machine ~are~ firmly on the deck. It's $40 for 2 sets of 2 powder-coated tubes, 4 wheels and a powder-coated shelf - but worth it comparatively, I feel. I would buy it again. As a note, I also have a $20+ plastic 'X'-stand that I bought for work, was $20. It works, but no height, no way to add a small shelf. I like this much more than that one, in the end. Three months later, still holding the computer sturdy under my desk surface, well above the carpet and cat-hair. Moves in and out easily enough. Solidly satisfied.

I wanted a rolling cart for a computer tower, and I wanted it in black. Easy peasy, right? But the biggest computer superstore in our area didn't have one, much less the smaller office supply stores. Amazon has tons of them. But this one is special because it allows you flexibility in how high the platform sits. Yup. I don't have to bend all the way down to the FLOOR to see some of the holes on the back of the tower. You just need to measure before you put it together. Mine sits as high as possible while still sliding unobstructed under my desk. The extra 10 bucks or so will be worth it in the long run, with all the "annoyance savings." It rolls easily, it feels sturdy and secure. People have had to modify it because the platform is a bit too small for their towers. I came out ok, because the feet of my tower were long enough on all four corners to securely grip the platform. All good. But keep that in mind before you buy. August, 2021 Even if all 4 feet of your tower seem to have a nice grip, it is still possible for them to move. I discovered this when my tower went plunging to the floor. it didn’t go far, it’s OK, but it was a tense moment. My suggestion now is to just put something across the back to make sure it doesn’t inch backwards and give you that problem. A little bungee cord, maybe some discreetly twisted or folded black electrical tape, maybe something along the back edge to elevate the surface, just something to block the thing from sliding back over the back edge. It still works great, slides around beautifully. Just mind the size and feet of your tower. August, 2023 I ended up putting my computer tower on my desk again. As I changed out different wired components, it was just a little bit easier for me to do that for a while. But this little rolling cart has continued to be helpful. Sometimes I use it to put my handbag on, so the contents are handy to me when I’m at the computer, whether I want to grab my phone or wallet or a favorite pen out of my purse and have it handy to put it back into. When I am not carrying a purse with a structured bottom, I often put a portable file box on it and roll it to whichever surface I’m working at. It’s nice to keep the worksurface clear by having the hanging file at my fingertips. At some point I will have my cord situation decided, and probably go back to putting my tower onto this cart, as originally planned, but It’s nice that I found two other very helpful uses for it in between time. 2024 I purchased a second identical cart, and have a pc tower on each one: A cosmetic home office reno meant that my computer set up had to go mobile for a good while. SO thankful for these carts! (Carrying/moving awkwardly-sized towers and accessing front AND back without the cart is a PAIN!) I miss having one for convenience with handbag and/or short file box though 😁. 2025 I ended up putting both computer towers on the desk again. Various reasons for that. Right now I'm using the rolling carts for the kind of hanging file boxes with lids that aren't very deep, but they contain action and project files close at hand. And sometimes I change it up and put my hand bag on one of them. Also very convenient. I love how flexible they are! Who knows? Maybe someday they will be plant stands in front of a sunny window, Or a little art carts, or a great place to store binders and notebooks close at hand! (In a box of some sort).

The four feet on the PC case are all touching the shelf, but hanging off the ends slightly. Just an inch or 2 more and it would be a perfect fit. It would be nice if the company made a larger option since it barely works with a mid tower footed gaming case and I don't see this working for a full tower. It seems to be well-made and sturdy. Rolls easily across carpet. The extra height and ability to roll it around makes accessing the back of the PC so much easier.

This cart was, almost, exactly what I was searching for. Almost because it was a bit too short (2 inches) in length for the feet of my mid-tower to safely fit but I also purchased a 7.75" x 17" floating shelf to fit in between the two. It gets my tower of the floor and up to desktop height within easy reach of all the front ports, buttons and BD burner. It also makes it much easier to move around for cleaning or gaining access to the rear as needed without destroying things ! The cart itself is solid and very easy to assemble taking maybe 10 minutes or so. You will need a Philips screwdriver but it comes with a wrench for the casters. The casters roll and pivot well and the locks are secure. This really is a great product. I wish it had been just a couple inches longer but hey, it is what it is, it looks good, and it works great, even if you have to add that shelf !

Really nice cart for getting your PC up & off the floor & being able to easily move it when needed.. Simple assembly with adjustable height. I bought 3 total & love them.. I use one for my printer, an HP. I did have to turn it sideways & move to the top position for the trays & cables to fit, but it works perfectly for what I want. The only downside to this for me was the one I bought for a full-sized - gaming or really souped up - computer. I thought I'd always had them, but my latest build proved that wrong & the case will not fit by any 1/4' & that would be a VERY tight fit. 1/2" wider would work for a full-sized computer, or a normal personal size computer.. I ended up using this last one for an office coffee maker cart. It works. 😊 Locking wheels, easily moveable, adjustable height, great paint.. I'd buy again, but I already have bought three. I think I'm good. Hope this helps.

I am replacing my old computer, so I have two running side-by-side for a while as I'm moving components and cables, setting up monitors, etc. I used to have one box on a corner of my desk (against two walls) where getting to the back side was a real pain. Putting the new one on the floor saves desk space, but I figured it should be up on something. This cart is perfect. Inexpensive, easy to assemble, sturdy, easy to move around (or to lock so it doesn't move). The design is well thought-out. I have it set on the second level. It could go one level lower, or up to three levels higher. It doesn't feel at all tippy - very solid. After getting the first one I ordered a second for the old computer, and now I can easily work with either/both. Such a luxury after having a very inconvenient setup for so many years. Highly recommended.

I needed to get my PC tower off the floor for easier access and this does the trick. And less dust! Also, I'm very petite so the wheels make it easier to pull the PC out from the wall to clean it and/or check for loose cables. Plus once a year, I take it apart and clean the dust out of the inside guts. This gives your PC longer life, when the fans and motherboard are not suffocating from dust bunnies. I would have liked the bottom to have a shelf to put stuff but this one was much cheaper than the one with bottom shelf. I can pick up a piece of wood at home depot and make my own damn shelf for nothing. In the meantime, I have a long skinny basket (from Target) that fits perfectly on the cross rods where a bottom shelf would go in which I keep all sorts of office doo-dads handy, however the shelf will make it easier to slide the basket in and out like a drawer. Overall, it suits my needs and it's super easy to put together. I didn't even need the instructions. It'll also be a quick and easy roll outside in the event of an earthquake or fire... living in CA and all! One never knows... I even put all my 'emergency to-go bags' in a long collapsible wagon in my longest closet so all I have to do is roll out everything in case of an emergency, so all the important stuff is on wheels and ready to fly!

It was a choice between this and the "J J.A.C.K.C.U.B.E D.E.S.I.G.N" as there seems to be only two options for height adjustable compact PC tower stands. They are very similar but this is normally double the price though I happened to pick it up on a Spring day deal for £33. While the other is rated for up-to 13kg this is rated for up-to 28.4kg. Seeing as how some PC's weigh 16 to 23 kg's according to google Gemini, I am much more confident with this stand compared to the other. Especially as I have a older Cooler Master CM690 II Advanced case that whilst built like a tank with no glass etc., allows for four 5 1/4" slots and six internal 3.5" and despite not using a GPU it easily weighs 20+ kg. I can barely lift it as I have a AIO water cooler, E-ATX board, use all four slots and various drives and cards installed! As for the stand it is well packed with no defects or flaws and is easy to put together using the included spanner plus a Philips screwdriver. It could be a tad deeper as my PC cases feet protrude each side by around 2.5cm nevertheless this makes the design more compact. I think it is designed for a standard ATX case as such you should find there is 0.5cm space between your case and the metal support bar. While it does not have shelf like the other one it is very sturdy and has a good range of height options. I chose the last but highest height leaving it about 10cm above the side of my desk but still sturdy enough even on wool carpet. Just for reference my case is around 49cm tall. It is easy to move and squeezed into the tight 35cm gap between my desk and the wall. I needed a shelf so used a very old full size windows 95 keyboard that I had laying around as a make shift shelf. On top I installed for a APC 8 gang extension lead which I highly recommend for PC gear and expensive electronics. I think it even pre-date’s even the PS/2 standard. USB? Who ever heard of a thing like that?! After a quick dust it did the job perfectly. I also used some Duronic cable ties to make everything neater and easier to pull the stand out from the side of my desk. So now I can easily access the back of my PC or move it to clean it out etc. and hopefully it will gather less dust from now on as it’s no longer on the floor. Not sure it’s worth £59 but I have found it, (the perfect stand) “Eureka” as Archimedes once famously said about this PC stand. Quite how he ran his PC without electricity is anyone’s guess, probably some sort of free energy Tesla tower but not one Musk would approve of due to DOGE cutting the budget for frivolous things like free energy devices. Mind you if 200 year old dudes are still claiming state benefits maybe Archimedes is still alive playing Doom on old windows machine.

Dieser Rollwagen wurde schnell verschickt und kam in gutem Zustand an. Er ließ sich schnell und problemlos zusammenbauen, man benötigte keine Werkzeuge. Seitdem steht er unter meinem Schreibtisch, beherbergt meinen Stand-PC und verschafft mir Fußfreiheit. Er altert mit Anstand. Ein guter Kauf!

Montage facile. Produit de qualité. Fait très bien le job.

Nicely made. Went together effortlessly in five minutes. Does exactly what I wanted it to. I would buy a second shelf for it if one were sold. Recommended.

Resistente, buenso acabados y sobre todo perfecta la opción de poder regular la altura de la base.