Replacement Hardware Repair Kit for Office Chair Gas Lift Cylinder - Includes Clip, washers, & Bearing - S4451-K

This item is amazing. It's cheap, of good quality, fits an Aeron chair perfectly, works very well, and is easy to install. Buying this can save you over a hundred dollars over hiring a technician.

Installed Perfectly and Done the Job.Str8 Forward Instructions

Nice replacement parts, easy to follow instructions. Worked great.

For my chair the only real issue is the rubber bushing kind of disintegrating creating a lot of noise and creaking. I felt like the bearing and washer in this kit were of lower quality than the ones in my chair so I just reused them with the new rubber bushing. Solved the issue, I give this a 4 star because it’s really the only kit on the market for this kind of thing and it did work for me.

Arrived quickly 10 minutes chair is fixed. All you need is a screwdriver to install the clip. Saved a ton of money this is a $400 chair.

This kit completely eliminated the noises my 5-year-old office chair had developed over the years. It's actually an upgrade, as upon disassembly I discovered the chair's original cylinder only had a plastic bushing and single metal washer rather than a thrust ball bearing sandwiched between two washers like this kit provides. Nonetheless, this kit fit perfectly and I'm 100% thrilled with the result!

I bought a chair off of Marketplace because I liked the retro cover on it, not because it "sat well." Been trouble since I got it home. I've already done work on cleaning it and reattaching the upholstery. It's probably 15 years old. So, the other day, a pile of what looked like greasy graphite appeared below it--under closer inspection, there were assorted ballbearings in the pile. What fresh hell...? A few YouTube videos helped me identify the problem and what I needed to fix it. The gas cylinder seemed to be fine but the uppy/downy lever never did work. I have a height I want--I would not be a person who takes it up and down figuring that out. Anyway, I was so glad to see this kit available--the delivery time was longer than I'd hoped for, but as it turned out, it came two days earlier than the earliest delivery time. Easy installation--however, it appeared that uppy/downy thing was letting it sit too low. Another Amazon find remedied that and now I am queen of the world! Thank you!!!

I have a newer DxRacer Classic series (which was their top of the line model when I bought it last year.) It produced a horrible clicking noise whenever I leaned back or sat down or move around in any kind of way. All within the 1st month of owning it. I contacted the authorized seller and they sent me a brand new reclining and gas cylinders unit (like 200 bucks in parts) and this pretty much fixed the entire issue. I didn't think about it again until last month about 1 year later... the dread clicking came back. I probably could have sent away for another gas cylinders replacement, but I knew this time around the clicking is caused by broken ball bearing washer (since this is widespread knowledge around the net now). My chair is extra big model so the gas cylinders is heavy duty (not normal size) this hardware repair kit is universal size so it fits both normal and heavy duty gas cylinders. When I popped the pin off my chair and remove the base from the shaft, loose ball bearings spilled out onto the floor. The rubber stopper washer was completely shredded. The only thing that survived was the 2 washers that sat on the top and bottom of the plastic washer bearing. I knew immediately the net was correct. This was the issue for the clicks. A couple of tips I can give you on installation. Have a long wooden dowel or some other long blunt object to pick out the bearings and junk stuck at the bottom of the wheel base cuff. I had bearings stuck in the grease and particulate matter everywhere along the bottom. I cleaned all that out with the dowel (just wiped the dowel off in a paper towel at each step) until everything looked silvery and clean at the bottom. Another tip is make sure you have bearing grease before you do this installation. It does not come with the kit. You do not want to put these bearings in without bearing grease all over the washers and bearing washer or you will just break it sooner. Keep in mind bearing grease is different from bearing oil (grease is what you need for this task). The repair was done within 10 minutes (would have been less if I didn't have to pick out loose bearings from the wheel base collar.) No there are no clicks or pops. The chair rotates around as flawlessly as it did when it was new. I likely will have to do this again in 1 year, but at least now I know how to fix my chair for 10 bucks. I hope this helps. Also, there does not seem to be any issue with that washer bearing being 10mm smaller in this gas cylinder than the bigger heavy duty one that came with the DxRacer chair.