ミラクルシーラント PLUS SG 511 ポーラスプラス浸透性シーラー Quart PLUSQT61 1

I have natural stone tiles on my kitchen wall, behind the stove as a backslash as well. The contractor was just not professional enough to know that this was supposed to be treated with sealant to prevent the oil and other stains being sucked up by the stone what ended up on the wall while cooking. I have not spilled anything directly on it but it is normal when food is boiling on the stove to have humidity and stuff evaporate... A have suffered removing the residue. Didn't dare to cook again and ruin the wall again. After I have treated the tiles with this product nothing sticks in/on the tiles any more. I can truly recommend. Would do the job with paint and kitchen counter as well. However it made the color slightly darker, which I do not mind. Its nice and even.

Muy poderoso , concentrado rinde mucho !

My wife forced me to install unfilled travertine in our tub/shower walls and after grouting the tile and holes I sealed with this stuff. 2 coats. Grout and tiles darken but when the sealant dries/cures the grout color returns. Maybe overall a bit darker than before sealing but looks better, without looking rich like some sealers that "enhance" the tile and grout for that always wet look. I'll have to seal every 6 months or sooner but that's because of the tile choice we made. Good product.

excelente

We needed a sealer that would work for slates we'd chosen for the floor and for some encaustic cement tiles we'd bought from cementtileshop.com. They recommended Porous Plus on their website so we optimistically ordered a lot of it. On the plus side, I was thrilled with how it did the slates. It leaves a very natural look to the stone, is really easy to apply and resisted olive oil left on a sealed slate for a whole night. This is a basic requirement for stone in a kitchen. Encaustic cement tiles are very porous and the sealer just kept soaking in with each application. We spoke with a rep from Miracle Sealants who said we might need 4 coats. We tried that and even after giving it plenty of time to cure, oil would still stain the tiles even after a few minutes. We tried the regular miracle 511 and that didn't work for us either. The problem with these sealers is that the cost of experimenting is very high! We were lucky though in that we found "Buddy Rhodes Natural Look Penetrating Sealer" which is a water-based sealer that did a much better job with just 2 coats. Following that up with "Buddy Rhodes Beeswax" and finally our encaustic tile resisted olive oil for a whole night.