MOTOPOWER MP00205A 12V 800mA Automatic Battery Charger, Maintainer, Trickle and Desulfator

Great charger and does its job ! I use it to maintain the battery for my 4 wheeler while in storage. I like that it automatically will switch to maintain the battery when it’s at capacity. It’s extremely easy to use you just attach it to the correct terminals and it’s doing its thing. It was inexpensive and good quality I definitely recommend it.

I bought two of these battery maintainers to keep the batteries charged in my garaged cars and lawn tractor mower during the winter and they both work very well. Both of them keep the batteries charged and they perform a trickle charge so you do not have to worry about over-charging your battery. My only minor complaint is that I wish they had an on/off switch but I assume the engineers of the product designed it that way to ensure a charge whenever it is plugged into the AC outlet and I assume it would cost more than $14 bucks to do so. This is not a big problem because I plug them into a surge suppressor and that acts as an on/off switch. I just don't like having to unplug a device from the AC outlet in order to turn it off. I give this product 5 stars because it works very well, is durable, and dependable.

It’s very quiet. It charges great. Small enough not to be in the way. We use it to keep our batteries charged in our motorhome while we are not using it. Works well with a timer also.

Works well. Quality product. Quick shipping.

It works exactly as advertised. I am glad these will keep our car batteries alive while we are not home.

Works great 👍

Works as expected. Good value for the $s

Update 22 June 2024: five down to three was too harsh. It was extremely inexpensive and served well for four years. After searching (endlessly) for an appropriate replacement, I ended up buying another MotoPower unit - their 1.5a version. I figure a device with a little more heft probably won't generate as much heat as this one did, so may last even longer; and it was barely more than what I paid for the first one!Update 19 June 2024: After almost exactly four years in service, The charger died. Wife smelled the acrid scent of burnt out electronics and alerted me to it. It was in use daily for all four years. A while after the narrative below, I had set up a Raspberry Pi to monitor the battery voltage and turn this on when it reached a certain threshold - the backend story is the 2018 Honda Accord has a nasty parasitic draw problem, so it was necessary to alway have it monitored and charged cyclicly. So it was powered on and off from a few times to maybe ten times a day. However, a charger like this is _not_ a complex device; exactly four years of service strikes me as 'planned obsolescence'. So I'm dropping the rating from five stars to three stars. It is not hard to build simple electronics to last decades. There's just no good excuse for a short life - other than to 'encourage' a new purchase.Here's my tale:After a couple of months of driving my car barely once a week during the COVID-19 isolation orders, my 2018 Honda Accord wouldn't start. Tried a jump start from wife's 2002 Honda Civic - still no go. yikes! Got out the decent quality multi-meter I have - less than 8 volts, from a 12V battery. Double yikes! Checked the electrolyte - whoa, one of the six cells had exposed plates. Well, that fairly well explains the very low volts. Topped it up to the line, then tried jump start again...yep, triple yikes.Well, I had plenty of time on my hands being furloughed, so I ordered this little unit. Inexpensive, but it made appropriate promises for what it can do, for what it costs. Ratings good. Some horrible though. Took the chance.At 800mA, this is not going to charge a 500Ah car battery quickly. I hooked it up and monitored the voltage for several days. Weather was rather warm, 80's to 90's F, and I noticed this little device getting pretty darned hot - too hot, in fact.Disconnected it and took off the back plate. Board very hot to touch, capacitor and transformer too hot to touch. Bad design! This thing needs to either be potted with a non-conductive heat sink material for full contact with the inside of the case, or the case needs vents. Period. That much heat will toast those components over time. True - I was asking the device for all it had - to charge a pretty deeply discharged 12V high amp capacity battery. Which isn't _per se_ its intended function. Still though.I decided to DIY. Took a drill and drilled four holes in the back plate, and two holes on each side, see photos. Pretty? Not on your life. Crude but fairly effective? Yes indeed, at least, it allowed _some_ of that heat to dissipate.Eventually there was enough charge to start the car, took it for a long drive, then hooked it up again to see if it would complete the full cycle - which it did after another day. It eventually hit the couple of voltage marks to go into absorption mode, then into float mode. Highly accurate too - 14.19v - still absorption mode. 14.20v - boom, float mode. Repeatable.For twenty bucks, it did what I wanted - and most importantly, what I _expected_ - unlike some of the reviews that complain it took days to charge their battery...well duh! It puts out less than an amp, expecting a fast charge from a slow charge device is just....dumb.That said - please guys - make the 'slotted' sides into real slots, to let some air flow through it. I realize it adds a little to the manufacturing costs, but people will get a longer life out of their (admittedly tiny) investment in this - and maybe fewer will die out in the field, eliciting bad reviews.As for me, I'm very happy with it - because it met my expectations.

سهل الاستخدام، يعمل بصورة جيدة. استخدمته على سيارة بي ام التي استخدمها لفترات متباعدة. فحافظ على البطارية دون رسائل انخفاض الشحن التي تظهر على شاشة السيارة. المهم يتوصل بالطريقة الصحيحة. حتى لا تتاثر إلكترونيات السيارة.

It works.

CompactWorks perfectlyEasyClear instructionRecommend for all

Son totalmente originales, funcionan muy bien para hacer una carga lenta a alguna bateria, lo cual puede ayudar a mantener la salud de la bateria, y como mantenedor de baterias funciona muy bien, siendo compacto no ocupa espacio y permite tener bien si se almacenan las baterias.Muy recomendable calidad precio

Great product. Very good quality for the cost and delivery was quick for my part of the world.