Bauer Matching Set T-Handles Lock

I had been looking for some new handles for My canopy ( Truck cap/ Topper ) as my old handles were starting to have issues ( One broke off the center mount bracket and the other was seizing up due to old age and weather). In my search for new handles I look at some of the specialty shops that cater to those with a truck canopy ( or topper/shell ) and of course various retail outlets and online as well. In my search it was a little tough to find everything all together as compared to what is in the Bauer Matching T-Handle Lock Set kit this review is on. I had seen where you could get the whole kit ( some were Bauer kit's and some were not) Some of locking T-Handle's were just being sold as a single handle with the accessories with it ( I was looking for both handles, so basically a set of two with all the accessories ) In my search at some of the specialty stores I did see a few kits, but the kit was ridiculously expensive compared to the Bauer T-Handles Lock Set of two I bought here at Amazon... even with the shipping charges included, it was still cheaper by over 60%. At some of the specialty shops, to buy the kit was well over the cost of the Bauer T-Handle Locking Set here at Amazon. Some of the specialty shops also won't sell everything in a kit. I encountered this at some shops where everything is sold separately and once everything was added it up I found it to be quite pricey and more than what I was willing to pay ( I didn't wan't to buy their company, I just wanted some new handles ) In my search for new handles I checked some of the auto parts places and of course the hardware stores, and once again I encountered not being able to find the two in a set like here at Amazon. Lots of handles and the assorted parts sold separately and some where it was 1 handle with accessories per set which still turned out to be pricey. I found online some places and vendors that sold different make Locking T-Handle but they wouldn't fit my truck Canopy ( topper/shell ) that were sold one in a set and two in a set. Further online searches started to become fruitless and when I did find some that were two to set with all the accessories the vendor didn't ship outside of the U.S. ( this happened a lot, so it was a little bit of a test in perseverance to find a good value and someone that shipped to Canada and at a good price) After much searching over a number of days, I fount the Bauer T-Handle Locking Set here at a vendor on Amazon. The Bauer Matching T-Handle Set included two handles and all the accessories ( I didn't wan't to leave the one handle that was starting to seize on the canopy, better to change it now then when I can't open it on one side due to it seizing completely ) The Bauer set that I bought here at Amazon met the bill on a number of points. It included two handles on a nice long shaft, two keys per handle ( 4 keys total), two hard composite plastic gaskets , two long steel catches, two handle covers and four screws for mounting. The great thing about this set is matching keys for both locks! No having to have to fumble for two different keys, and trying to guess which key opens which handle. One of the nice thing about the Bauer Locking T-Handle set is that these handles are made out of steel , not a composite plastic which means they will be a lot more durable then the plastic ones. ( The old steel set on my truck have been on there for 12 years! ) Installation of the handles took about 10 minutes. The Bauer Locking T-Handle set is well built. The handles are very sturdy with no play in them. The steel catches that are included in this set are even longer by a about a 1/2 inch compared to my old one which means that they are deeper in over the side of your canopy ( Topper/Shell ) so they will help prevent someone from pulling your handle to one side and being able to wiggle the catch out and open one side of your canopy ( Topper /Shell ) and gain access to the inside. Once nice little surprise with this set is that Bauer has put loctite on the threads of the screws that hold the handles on ( I was ready to go and purchase some... but didn't have to since Bauer provided it... a subtle but nice touch to help keep you handles in place snugly. The long steel shaft on the handles and the set screw on the catch leaves you ample room to make sure your able to have enough length to adjust where you need the catch to be to secure your canopy ( Topper /Shell ). The only down side I can see to the set is that when you are setting your catches on the shaft, you need to make sure you just get them to where they are snug. If you really crank the set screw you can strip the threads on the catch ( Yikes! ) The covers come a little out of form, so you might want to consider putting a few rubber bands around the covers while they are on the handle to help them back to their form before you install The covers are there to keep the rain and dirt out of your key insert for the lock, you do not have to use them but they are nice to have the option. The two gaskets have a round plastic ring on them in the center. On some canopy's ( Topper/Shell ) the ring will not sit inside the hole in your canopy ( Topper/Shell ) frame. I had this occur for me upon installation, I just cut off that ring on the side that was going to fit flush with the frame that the handle secures to on the inside of the canopy ( Topper Shell ) You might not have to do this depending on your canopy ( Topper/Shell ) but it works well in my circumstances. These were an awesome deal and the vendor was great in getting these to me shipping wise. The price even with shipping was a bargain, way cheaper than I could find anywhere in my searches online and with in store comparisons. I am more than happy with the Bauer Locking T-Handle set. If your looking for a new set of Locking T-Handles for your canopy ( Topper/Shell ) that ought to last you a long time and at a good price, give these a try....I am sure you will be happy with them too.

If used on a 2008 Leer cap the center hole must be drilled to .625. The rubber handle covers are needed as there are no dust covers built in to the lock cylinders. It appears to be a solid, well made set with easy installation.

These good quality replacements latches fit perfectly, easy to install and function properly in my used canopy.

Nice t handles, one of my handles broke on my truck cap so looking for a replacement these had pretty good reviews so I bought them, as some reviewers say they had to drill out the center mounting hole, i had to do the same, really not a big deal as it wasn't a major task, they are nice quality, feel solid, smoothe turning, I love the dust covers too, they protect the key hole from dirt and are grippy, I'm satisfied with my purchase! Like others they are 5 star but gave a 4 star for the center hole missing measurement.

As the title suggests, the latches fit perfectly without any drilling or enlarging the existing holes in the hatch cover. I bought my canopy used, from a dealer, and noticed the existing latches were not factory, but replicas of these purchase, so I’m guessing the previous owner lost the locks, and instead of the dealer buying a new set from Leer, they simply installed these as well. They lasted about 6 years before starting to get a little crusty, but for the $23 they cost, it was an easy decision just to replace them with new. One caveat as others have mentioned, the assigned keys seem to be all the same, with the same key number (Even the 6-year-old latches had the same key as the new ones). So while it’s doubtful someone might think their key would work in someone else’s canopy, or even try it, they actually might have a successful opportunity to gain access to a locked bed. Quality seems good, install was 5 minutes for both sides, and adjustment for very easy for a nice snug fit.

Replaced nicely for the old ones

Fit my leer shell for my 2010 ranger perfectly. Super easy to install, and the locks make me a lot more comfortable leaving camping gear in my truck bed. The metal handles feel very good and come with rubber caps to keep water and grime out of the locks. They are also easy to open and close from inside the bed.

Great fit, replaced the old handles. I purchased a used ATC camper shell for my 17 Ram 2500. The owner did not have keys for the old handles. I purchased these and they fit perfectly. They came with little covers for the handles for the weather, not sure how long they will last on there or if I will lose them but seems like a nice gesture. Keys are nice and the locks lock smoothly. Overall very happy, installed in minutes.

MUY buen producto y coincide perfectamente con la descripción, los instale MUY fácil.

Sturdy produck and well priced and easy to install.

The best

Relativ schnell geliefert und preisgünstig aus den USA

Great product at a value price line, so easy to install at a much better deal than local custom cap dealer. Looks great nd locks well.