Accusize Industrial Tools No.00 Hss Keyway Broach Precision Sets in Fitted Wooden Box, 5100-0001

I build steam engines from castings, and have never been satisfied with the standard "grub screw on a flat" means of attaching the flywheel, but I thought proper broaches only came in large sizes.This broach set is made for tiny work--the broaches fit in the palm of my hand. I didn't need an arbor press either; I put the flywheel across two 1-2-3 blocks in my mill vise and used the quill to press the baby broach through. Don't forget to go to Grainger and get some matching baby key stock.Top notch for model machine shop work.

Used this to broach a 1/8" keyway in a gear. worked great, broach was sharp, had zero problems! Nice little set, I'd recomend. I used a harbor freight 12 ton press to do the job.

Got it to cut some keyways in some gears and it work great

This is a very reasonably priced set of three small Keyway broaches. They came with several bushings and one shim. I think they should include a second shim in order to get the Keyway cut to the proper depth, but I was able to make one myself from some scrap material I had on hand.

I've cut a couple of key ways with these and they turned out great. Agree that they could use a second shim.

I was able to broach steel with a two ton press. I needed to make an additional spacer. One spacer is not enough.

Nice quality. Worked well.

Nice set of broaches. Nice finish and size is right